Description
EVE 30P 18650 3000mAh 30A Battery Cell - INR18650/30P
The EVE INR18650/30P is a powerful, compact 18650 cell rated at 3000mAh and capable of delivering up to 30A continuous discharge current with proper thermal management (temperature cut-off at 75°C). It is designed for high-drain devices and applications where both capacity and burst power are needed. This cell is suitable for battery pack builders targeting mid-to-high discharge loads.
Specifications
| Attribute | Value |
|---|---|
| Model | INR18650/30P |
| Cell Type | Li-ion INR (NCA-based) |
| Capacity (Nominal) | 3000mAh |
| Capacity (Minimum) | 2900mAh |
| Nominal Voltage | 3.60V |
| Voltage Range | 2.50V – 4.20V |
| Standard Charge Current | 1.5A (0.5C), CV cut-off at 0.1A |
| Max Charge Current | 4.0A (1.3C), CV cut-off at 0.1A |
| Standard Discharge Current | 0.6A (0.2C) |
| Max Continuous Discharge | 30A (10C), with 75°C temp cut-off |
| Cycle Life | ≥60% capacity after 250 cycles @15A |
| Initial Internal Resistance | ≤18 mΩ (at 1kHz AC) |
| Dimensions | Ø18.35mm × 65.15mm |
| Weight | ≤48g |
| Operating Temperature (Charge) | 0°C to 60°C (recommended <45°C) |
| Operating Temperature (Discharge) | -20°C to 75°C (recommended <60°C) |
| Storage Temp (1yr) | -20°C to 25°C |
| Chemistry | Li-ion (likely NCA blend) |
| Manufacturer | EVE Energy Co., Ltd. |
This cell is well-suited for power tools, e-bike battery packs, portable high-drain devices, and DIY battery applications requiring reliable performance and high burst output. Always use within manufacturer-specified parameters and monitor cell temperature under load to prevent overheating.
DIY500AMP.COM design
Safety Warning for Lithium-Ion Battery Usage
Customers should have a clear understanding of lithium-ion battery handling and safety before making a purchase. Lithium-ion batteries are highly sensitive and may pose fire, burn, or explosion risks if improperly handled. Always charge batteries on fire-resistant surfaces, and never leave them charging unattended.
By purchasing, you assume full responsibility for any injury, damage, or loss arising from the incorrect use or handling of lithium-ion batteries or chargers. Compatibility with specific devices is not guaranteed. Only charge using a smart charger designed specifically for this battery type, and do not mix old or used batteries with new ones.
Important Usage Guidelines:
-
Not for Use in E-Cigarettes or Similar Devices: Lithium-ion batteries present a serious risk of injury, property damage, or even death if improperly used.
-
Risk of Fire and Explosion: Misuse can cause batteries to ignite, explode, or release harmful gases.
-
Always Use in a Protected Pack: Ensure batteries are used within intended specifications and supported by appropriate circuitry.
-
Proper Storage and Handling: Store batteries in protective cases, away from metal items to prevent short circuits.
-
Inspection Prior to Use: Do not use batteries with damaged wrappers, torn insulators, or visible damage.
-
Follow Manufacturer's Charging Specifications: Avoid overcharging or over-discharging, and never alter, dismantle, puncture, crush, or burn.
-
Heat and Water Precautions: Do not expose batteries to high temperatures or any liquids.
-
Assembly Guidelines: Batteries should only be spot welded; do not solder directly onto battery terminals.
Users are expected to have battery-handling knowledge before purchasing. By using these batteries, you acknowledge that usage is solely at your own risk, and you take full responsibility for any resulting consequences.
For Resellers: Please ensure all safety information is passed along to end users to promote safe handling and proper use.